Installing Advent Vega ModdedStock 1.10 v2

Checklist:

1. Computer with USB port. (of course)
2. USB Cable male to male (you have it already)
3. USB Drivers from Advent Vega or From POV Mobii
4. Vega Moddedstock 1.10 v2

You need to install Moddedstock 1.10 v2 to be successfully install vegacomb 3.2 build 9. Here is how:

1. Charge your tablet, make sure it turned off.
2. Install USB Drivers on your computer. You need administrative privilege to accomplish this.
3. Connect the USB cable from your tablet to your computer.
4. Hold "Back" button, for 2 second then, press the "Power" button 2 second and release, still hold the "Back" button 2 second after. Your tablet will enter recovery mode. You'll hear notification sound on the Computer, and a bubble saying new device found. Wait until driver installation complete, bubble "your device is ready to use".
5. Run the Vega Moddedstock 1.10 v2. Your tablet will display "Entering nvflash recovery mode / nv3p server", just wait until the flashing complete, your vega will reboot and turned itself off.
6. Remove your charger if you like, and turn on your vega with the modded stock installed.